Description & FeaturesThe Our Wheel Flanges are made of low carbon steel with all contact surfaces machined to a smooth finish. Maximum seating of the Flanges on machine spindles is ensured by proper grinding and lapping of the taper bore in the Flanges. Also the circular out step on the Flanges are machined so as to perfectly sit on the corresponding in steps of grinding wheels and thus, ensure proper clamping of grinding wheels and thus, ensure proper clamping of grinding wheels to the Flanges. Three adjustable balancing pieces are provided on the Flanges.
Keeping grinding wheels pre-fitted with Flanges will result in quicker change- over of wheels and thus improved productivity.
Common UseThe Our wheel Flanges are used to clamp grinding wheels onto a cylindrical grinding wheels onto a cylindrical grinding machine.
Care in useThe taper bore of a Wheel Flange must be thoroughly cleaned before mounting on the machine spindle.
The flange plate should be thoroughly cleaned before clamping a grinding wheel. Dust or metal particles left uncleaned can break a grinding wheel when clamped tightly.
Paper coverings supplied with grinding wheels should be retained as cushioning when clamping. This will prevent breakage of grinding wheels.